Bath Sink Drain Installation: Common Mistakes You Should Avoid

Proper installation is the key for your bathroom sink drain to function well in the long run. As the time goes by, the pipes and drains will loosen and leak. Based on this fact, it is recommended that you perform proper installation to ensure durability. Additionally, you should also use high quality parts and materials. You also need to make sure that you also avoid mistakes in the installation process. Otherwise, your bath sink drain will not work properly and early leakage may also occur. Here are some common installation mistakes that you should avoid:

1. When installing the drains, you have to be sure that the connections are fastened tightly. However, don’t tighten the connections too securely since it can cause cracking and strain. It can also cause warping, which will allow water to pass through. Most people fasten the connections too tightly and cracking happens afterwards. You should also check the washers since they have the task to close air leakage on the pipe.

2. Sometimes, people don’t really pay attention to the materials used to manufacture the parts when installing bathroom sink drain. Stainless steel is the recommended material since it offers more durability than any other materials. If you buy the drain set separately, do check if the other parts are also made of stainless steel.

3. Don’t pour cleaning fluids that contain strong acids into the drains since they can cause corrosion. Otherwise, corrosive acids can cause your drain to leak in the future.

4. Don’t cut the plastic pipes too long or too short. If the pipes are too long, they will overlap and tend to be out of alignment. When you cut the pipes too short, it will cause water to seep out and the drains will gradually leak.

5. You should clean your bathroom sink drains regularly if you expect them to work properly. You don’t need to disassemble the drains when cleaning but you can do it if regular cleaning is not performed. Make sure that you also don’t use hazardous cleaning materials since they will only damage the drains. Hot water is the right cleaning medium since it will prevent serious clogging.

6. Cracking and leaking will still happen even if you perform regular maintenance. Therefore, performing the necessary precautions during and after installation is essential. Hence, the sink drains can last longer. If you find that the drains eventually start to leak, replacing them altogether is the best solution. It is because replacing some parts for short term use will only cost you more money in the future.

Leave a Reply

Your email address will not be published. Required fields are marked *